IP: Login Page Username Password

IP: Icon / Image Meaning Table The IP address serves as a popular internal network gateway for a wide range of routers, regardless of their brand or model. This address is primarily employed to establish administrative access for routers, facilitating network administrators in configuring both the router and the associated network. It's crucial to recognize, though, that is not a universal login address for all routers. Moreover, using to access and manage router settings can sometimes lead to challenges. Below, we outline some frequently encountered issues along with their potential solutions, to assist users in navigating these scenarios.


1. How to use to log in to the router's administration page?

Based on our earlier discussion, is typically the administrative login address for routers. To log in to the admin page, follow these three straightforward steps:

  1. Verify that is indeed your router's login IP. This information can often be found on a label at the bottom of the router.
  2. Login information on the nameplate

  3. Connect your computer or phone to the router. Laptops and phones can connect via WiFi, while desktops require a network cable connected to the router’s LAN port.
  4. Router connection diagram

  5. Open a browser of your choice, such as Edge or Chrome, type in the address bar, hit Enter, or directly navigate to This action will lead you to the router's management login panel.
  6. Schematic diagram of login address

  7. At the login page, input your username and password, then click 'Login' to proceed to the router’s settings and management.
  8. Schematic diagram of the login page

Note: The login management address can vary among different router brands and models. It’s essential to know your router's specific management address. While is a standard default login IP for many routers, several utilize alphabetic addresses like melogin.cn, falogin.cn, tplogin.cn, miwifi.com, etc. These and other details under the general label in the management page indicate the router's admin address. Remember, this address can be modified, and using an outdated address post-modification will result in login failure. To find the current IP address of your router, connect to its WiFi network with a computer or phone and check accordingly. For detailed guidance, refer to How to find the router IP address?

🔝 Back to top

2. What are the reasons and solutions for unable to access the router's administration page?

As previously discussed, is typically the login address for router settings. If you can't open the router login page using this address, let’s delve into the potential causes and solutions for this common issue.

The reasons why accessing the router settings via might fail can be categorized into five main areas:

Can not open schematic

(1) Incorrect local IP configuration on the computer

If the local IP of your computer was previously configured but not correctly, it could prevent router login. The solution is to set the computer's IP address to be obtained automatically. For instance, in Windows 10:

IP address setting diagram
  1. First, right-click the 'Start' button in Windows 10 → select and open 'Network Connections'.
  2. Next, right-click 'Local Area Connection' → choose 'Properties'.
  3. Then, select 'Internet Protocol Version 4 (TCP/IPv4)' and click on 'Properties'.
  4. Finally, select 'Obtain an IP address automatically' → 'Obtain DNS server address automatically' → click 'OK'.

Ignore this issue if your computer’s IP is already set to default auto-obtain.

(2) Router connection issue

Ensure proper connection among your computer, modem, and router.

Router connection diagram

The external phone line or fiber should be connected to the modem, which in turn connects to the router's WAN port via a network cable. For laptops or phones, use WiFi to connect to the router; desktops need a network cable connected to the router's LAN port.

(3) Network cable problem

If the network cable connecting your computer and router is faulty, such as being damaged or having aged connectors, it will prevent you from opening the router login page. It's important to ensure the cable is in good working condition. If you have a spare cable at home, try replacing it with one that is intact and securely connected, and then try again to open the login page again. Additionally, you can check the network status icon in the bottom right corner of your computer or use the 'Ping' command to verify the connection.

(4) URL input error in browser

Many browsers open with a large search box on their homepage, such as Google, Bing, or Baidu. A common mistake is to enter the address into this search box, which will not lead to the router login page. Instead, the correct way to enter is in the browser's address bar, located at the very top of the browser, where website addresses are displayed. This ensures that the browser directly navigates to the router's login page rather than searching for the address as a query. The correct position is shown in the following figure:

Correct location of address bar

(5) Router settings issue

Some users mistakenly believe that the IP address of all routers is, but in reality, not all routers have as their default login website. Different brands and models of routers may have different login addresses. If your router's IP address is not, then using this IP will definitely not open the router settings page. Therefore, you need to confirm whether the IP address of your router is actually, which can be found on the label at the bottom of the router.

Another situation is that the router's default IP address has been modified. Some users modify the default address for increased security. After such modification, will no longer be the valid login address, and the new, modified address must be used. To determine the real login address of your router, you can:

  1. Right-click the 'Start' button on Windows 10 → select and open 'Network Connections'.
  2. Right-click 'Local Area Connection' → select 'Status'.
  3. Click 'Details'.
  4. Locate the 'IPv4 Default Gateway' in the details page, which will indicate the current login IP of the router.
Private network IP information

These are the common causes and solutions when fails to open the router settings page. If these steps don't resolve the issue, consider resetting the router to its factory settings before attempting to log in again. For guidance on resetting the router, refer to How to restore the factory settings of routers using as the login address?

🔝 Back to top

3. What if I use to log in to the router result in the login page of the Internet service provider?

When inputting in your browser, you might expect to see your router's login screen but find the ISP's login interface instead. What could be the reason? What is the actual login address of the router, and how can one access the router's login interface?

Other login screens

If your router's administration address is indeed, but it opens the ISP's broadband login page, it could be due to the following reasons:

(1) IP address conflict between the router and the optical modem

Both the ISP-supplied optical modem and your router might default to the same IP address: This overlap can lead to accessing the ISP's interface instead of your router's when attempting to log in.

Solution: Change the router's IP address. The method is as follows:

  1. Disconnect the router's WAN port from the optical modem, ensuring only the computer is linked to the router's LAN port. As shown below:
  2. Router computer connection diagram

    Important note:

    Do not worry about the computer not being able to access the internet after unplugging the router's WAN port cable, as internet access is not necessary for setting up the router. Simply connect the computer to the router's LAN port with a network cable, or connect a laptop/mobile phone to the router via WiFi to open the router's settings page and configure the router.

  3. Log into the router's setup by typing in your browser's address bar.
  4. In the router settings, navigate to 'LAN Port Settings' (or similar) and change the IP address (e.g., to As shown below:
  5. LAN port modification
  6. Reconnect the WAN port to the optical modem and use the new IP address to open the router's login interface.

(2) The router's IP address has been modified

If users are unaware that the router's IP address has been changed and still enter the default, the ISP's login page may also appear.

Solution: Enter the updated router IP address to access the settings. You can find the current IP by checking the 'IPv4 Default Gateway' in your computer's Ethernet settings. As shown in the figure below, the IP address following 'IPv4 Default Gateway' is the router's current IP address.

real gateway address

That means, to open the router's login page, you need to enter in the browser now.


① The router's login IP address can be manually modified.

② Many modern routers will automatically change the IP address. When the router's WAN port is connected to the optical modem, and if the router auto-detects that its IP address is identical to that of the optical modem, the router will automatically adjust their IP to prevent conflicts when connected to an optical modem.

🔝 Back to top

4. What is the username and password of routers using as the login address?

With all the details covered earlier, you might be wondering about the router brands that typically use as their standard login address, including their default user credentials. We've gathered information on a variety of popular router brands and models, detailing their standard login usernames and passwords. Below, you'll find a compiled list of these details for routers that default to as their access point, complete with an analysis of their usage frequency. Please note that this data is intended for reference purposes only. If a certain brand or model is not listed, it means we haven't yet collected information about that specific router using this IP as its default login address.

🔝 Back to top

5. How to change the password of routers using as the login address?

To safeguard your network and prevent unauthorized access, it's crucial to update your router's default username and password. Here's a guide on how to access to update both the router's login and WiFi passwords.

(1) How to change the router's login password?

If you already know your current password, follow these steps:

  1. Log in to the router's administration page (refer to question 1: How to use to log in to the router's administration page?).
  2. In the router's administration settings interface, click 'Advanced'→'Administration'→'Set Password'.
  3. Enter the old password and new password, and then apply them.
  4. Modify router login username and password


After updating the router's admin login password, it's crucial to correctly enter this new password for all subsequent logins. To ensure smooth access in the future, it's recommended to memorize the updated password. Alternatively, you could write it down on a note and attach it to the back of the router to prevent any inconvenience caused by forgetting the password.

(2) How to change the wireless network password (WiFi password)?

The process to change your WiFi password is similar to updating the login password and also requires logging into the router's administration page.

  1. Log into the router's administration page (refer to question 1: How to use to log in to the router's administration page?).
  2. After successfully logging in to the router's administration settings interface, click 'Advanced' → 'Setup' → 'Wireless Setup' and select 'WPA-PSK/WPA2-PSK'.
  3. Enter the PSK password (WiFi password) and then apply it.
  4. 3 authentication types: automatic selection, WPA-PSK, WPA2-PSK. There is basically no difference between the 3 types. Just select automatic.

    3 encryption algorithms: automatic selection, TKIP, AES. AES encryption algorithm is generally recommended.

    Modify WIFI connection password

🔝 Back to top

6. How to restore the factory settings of routers using as the login address?

If your router settings are messed up and you can't access the internet, how can you reset the router to factory settings by logging into the administration page? Generally, there are 2 ways to restore factory settings: through the router's administration page or by pressing the RESET button on the router itself.

(1) How to restore factory settings from the router's administration page?

  1. Log in to the router's administration page (refer to question 1: How to use to log in to the router's administration page?).
  2. After successfully logging in to the router's administration settings interface, click 'Advanced' → 'Administration' → 'Backup Settings'.
  3. Restore factory default settings

  4. Click the 'Revert to Factory Default Settings' button, A dialogue box will appear asking if you are sure about resetting to avoid accidental operations that could affect normal internet usage.
  5. Whether to restore factory settings

  6. Confirm by clicking 'OK'. The router will reboot and revert to its default settings.

This method is only applicable if you know the router's account and password. If you have forgotten the login information, don't worry, we have another method to reset the router, let's go ahead.

(2) How to reset the router to factory settings by pressing the RESET button?

  1. Find the RESET button on your router. It could be a pushable button or a small, pinhole-sized button requiring a pin or similar tool for pressing.
  2. Router Reset Button

  3. Make sure the router is on, indicated by a lit power light.
  4. Press and hold the RESET button for about 10 seconds, then release. All lights will flash and then turn off. After a few seconds, the router will restart, indicating a successful reset to factory settings.


① Ensure the router remains powered on during the reset process to avoid potential hardware damage.

② Remember that resetting erases all previous configurations. You'll need to reconfigure your router settings to reconnect to the internet. Proceed with caution to avoid any connectivity issues.

🔝 Back to top

If you have a certain understanding of the Internet, you can also go to IPv4: to view more professional solutions, including:

Special warning: Router initialization will lose all setting information. If you don’t know much about router settings, don’t try it lightly. You can ask someone familiar with it to help.

If you still have any network issues that cannot be resolved, you can also contact us.

🔝 Back to top

🔢 IP Number

IPv4: Network Class, Net ID, Host ID Description of IP Address in Binary, Decimal and Hexadecimal Description of IP Address Class A/B/C/D/E and Network ID, Host ID

🔠 IPv4 Address Space

  • Prefix: 192/8
  • Designation: Administrator ARIN
  • Date: 1993-05
  • Whois: whois.arin.net
  • Rdap: https://rdap.arin.net/registry, http://rdap.arin.net/registry
  • Status: Legacy
  • Note: [9][10]

📚 Private IP Comment