192.168.92.1 How to Access the Tesla Charger Settings?

Most Tesla chargers use 192.168.92.1 as their default IP address for the settings interface. By using this IP address, owners or network administrators can access the Tesla charger settings to adjust charging parameters or check the device's status. This article will guide you through the steps to access the Tesla charger settings using 192.168.92.1.

1. Power on the Charger.

First, ensure the charger is powered on. After powering on, a green indicator light should illuminate, indicating that the device is operational.

2. Connect to the Charger’s Wi-Fi Network.

• Open the Wi-Fi settings on your mobile phone.
• Look for the charger’s Wi-Fi network, which typically includes "Tesla" or similar wording. The default SSID for the Tesla Gen 3 charger is TeslaWallConnector. You can find the specific Wi-Fi name and password in your charger manual.
• Select the charger’s Wi-Fi network and enter the password to connect.

3. Open a Browser and Enter the IP Address

Open the browser on your mobile device and enter “192.168.92.1” in the address bar, then click "Go."

4. Access the Settings Interface

If everything was done correctly in the previous steps, the browser will automatically load the Tesla charger settings interface. You can now manage and view your vehicle’s charging status.

If you encounter issues with accessing the Tesla charger settings interface at 192.168.92.1, please check the following:

• Is the charger powered on? If the charger is powered, the indicator light should be on. If there's no power, the charger won't start, which will prevent access to the settings interface.
• Are you connected to the charger’s Wi-Fi? The Wi-Fi network for the charger typically starts with "Tesla," making it easy to identify. If you accidentally connect to a different Wi-Fi network, you will not be able to access the charger settings.
• Is the IP address entered correctly? Double-check that you've entered the correct IP address. Common mistakes include mistyping numbers or missing dots, such as entering 192.16892.1, which is incorrect. Another possibility is that the charger’s IP address has been changed. If so, you'll need to use the updated IP address to access the settings interface.