http://192.168.0.1 Router Login Admin

IPv4: 192.168.0.1 is Private Use IP.

192.168.0.1 is typically used for the external gateway of the internal network. Many times it is a Wifi wireless router or switch with a routing function. If you want to login to its web administration interface, please click http://192.168.0.1 to enter, if you have connection problems or if you want more technical details, please see the introduction as below.

192.168.0.1Content:

1. What can 192.168.0.1 do?

The IP address 192.168.0.1 is the default gateway for most wireless routers or ADSL modems.

The router can use multiple IPs as the login address, but 192.168.0.1 is one of the common addresses. It should be noted that the default IP access address is different for different brands of routers, and users are generally allowed to modify the default address. Therefore, please refer to the specific access address. It should also be added that the default port is generally 80, so the port is omitted from the access address (the complete address is http://192.168.0.1:80). If the port value is modified, it needs to be written completely, for example, http://192.168.0.1:8080.

To manage your router, fill in 192.168.0.1 in your browser's address bar. After you successfully access the router management panel, you can adjust and set the following options: IP Qos, DNS, proxy, LAN, WAN, network management, security options, WLAN settings, PPPOE, MAC, WPS, DSL, and DHCP clients end.

IP:192.168.0.1 Icon / Image Meaning Table

🔝 Back to top

2. How to log in 192.168.0.1 IP address?

Do as follows:

1. Check the management address of your router in the manual or check the login IP and default user name and password through the instructions on the back of the router (see [Figure 1]).

2. Manually enter http://192.168.0.1 in the address bar of your browser and press Enter.

3. Enter your username and password on the login page, and then click "Login" to log in to your router administration page. Usually, the default username and password are both admin.

Schematic diagram of the nameplate on the back of the router
[Figure 1]

❕ Note:

①If you cannot log into the router interface via 192.168.0.1, please try another address, such as: 192.168.0.1 or 10.0.0.1. For details, please refer to the router's manual or the label on the back of the router. Please refer to Q&A: How to find the router IP address?

②If you have changed your username and password, and you have forgotten it, please follow How to reset the username and password of the router? to perform a router reset operation.

🔝 Back to top

3. How to reset the username and password of the router?

Do as follows:

If you forget your login password, you will need to reset your wireless router or ADSL modem. You can find the default password of the router through the above method. If you still cannot find it, you can reset the router. The router has a hidden reset button. When the device is powered on, you can gently press the Reset button on the router for more than 10 seconds with a toothpick. Then release the button to restore the device to the factory configuration and automatically Restart. (see [Figure 2]).

Schematic diagram of resetting the router
[Figure 2]

Graphical example of correct router connection

Router connection diagram
[Figure 3]

For the complete method of logging into the router management interface, please refer to Q&A: How to login to the router interface.

🔝 Back to top

4. What if the router management interface cannot be opened?

Enter http://192.168.0.1 in the browser to display that the webpage cannot be opened. When the router login interface cannot be opened, the following figure is shown (see [Figure 4])

Can not connect to router diagram
[Figure 4]

Do as follows:

1. Please make sure that the router and the computer are properly connected and the router's LAN port is on and the corresponding indicator is on according to [Figure 3]

2. Set the computer's IP to get it automatically

3.Check if the address you entered in the browser is the router management address (according to [Figure 1])

4. Check if the router port is modified: If remote management is enabled on the router and the management port of the router has been modified, you need to log in as http://management IP:nn, nn is the modified port number, such as: http://192.168.0.1:8080.

5. Check if the browser is set to the proxy mode. If the browser is set to the default automatic dialing or proxy server function, it will fail to login to the management interface.

6. Forced IP and MAC address binding is enabled on the router. If it is not set correctly, it will fail to login to the management interface. If forget the router management IP or port, it is recommended to reset the router to factory settings (according to [Figure 2]).

🔝 Back to top

5. How to modify the wireless WIFI password and wireless network name?

Reason for modification: To improve network security and prevent being hacked, To make the wireless WIFI easy to remember, etc.

Do as follows:

1. Log in to the management page of the router (refer to question 2: How to log in 192.168.0.1 IP address?).

2. Click the "Wireless" menu under the routing setup after successfully logging in to the router's management page.

3. On the wireless page, enter the new wireless network name and new wireless WIFI password, and then click "Save" (see [Figure 5]). Schematic diagram of modifying wireless WIFI password
[Figure 5]

🔝 Back to top

6. How to modify the IP address of the login router?

The default login address is preset by your router, so you will have a login IP address or domain name when you get a new router. But users can modify it by themselves, which can effectively prevent others from tampering with your router information.

Do as follows:

1. Log in to the management page of the router (refer to question 2: How to log in 192.168.0.1 IP address?).

2. Click the "LAN" menu under the routing setup after successfully logging in to the router's management page. The LAN port IP settings default to automatic (recommended).

3. Modify the LAN port IP address to your own desired IP. For example, modify it to 192.168.2.1 or 192.168.3.1 (see [Figure 6]).

4. After saving, restart the router and login to the router with the new address.

Schematic diagram of modifying the router login address
[Figure 6]

💡 Tip: If you encounter any problems during this process, you can restore the router to factory settings so that all custom settings are restored to their original state.

🔝 Back to top

If you encounter a network failure, but the router settings are difficult for you, or the problems you encounter do not require setting up a router, you can check the simple solutions we have prepared for you:

🔝 Back to top

The IP address 192.168.0.1 belongs to the 192.168.0.0/16 IP segment in CIDR format. The starting IP and ending IP are 192.168.0.0–192.168.255.255. This IP address segment has a total of 65,536 IP addresses, the scope is Private network, Used for local communications within a private network.

Error Format: 192.168.0.l, 168.192.0.1, 1.0.192.168, 1.0.168.192, 192.168|0.1, 192.168 0.1, 192.168.l.0.1, 192.168.01, 192.168.1.0.1.

192.168.0.1 Router Default Username And Password

💡:The following is the use of IP address: 192.168.0.1 as the default user name and password of the router as the gateway IP.

Brand Default Username Default Password Usage Rate
Cisco [none] [none] 11.11%
admin [none] 44.44%
33.33%
admin 11.11%
D-Link [none] [none] 2.89%
- - 21.73%
Admin [none] 10.18%
admin 25.31%
user [none] 0.14%
[none] year2000 0.14%
[none] admin 0.55%
admin  0.55%
- admin 20.5%
Admin blank 1.65%
Admin none 0.96%
admin password 0.41%
admin admin 6.6%
admin - 0.28%
(blank) admin 0.14%
admin admin  3.16%
'blank'' Admin 0.14%
admin password  0.28%
2.2%
admin ''randomly generated''  0.14%
admin ''blank''  0.14%
admin <blank>  0.14%
blank blank 0.55%
admin admi 0.14%
admin default 0.14%
none none 0.41%
cu10090216@citinet 125856 0.14%
admin (none) 0.28%
admin 0.14%
Linksys admin  28.57%
[none] admin 7.14%
admin admin  7.14%
comcast 1234 7.14%
admin - 14.29%
comcast 1234  7.14%
user & admin 7.14%
admin 14.29%
admin admin 7.14%
Netgear admin password  85.91%
0.67%
admin 1234  1.34%
[none] [none] 0.67%
[none] 1234 2.68%
admin 1234 2.68%
superuser password  0.67%
admin admin 4.03%
admin superuser 0.67%
admin sky 0.67%
3Com - - 40%
20%
admin admin 20%
n/a (none) 20%
Aceex admin admin 66.67%
admin 33.33%
Actiontec randomly generated admin 3.03%
24.24%
admin admin  3.03%
admin 9.09%
admin password  18.18%
- - 12.12%
admin ''randomly generated''  6.06%
na na 6.06%
Shane Pollak shane123 3.03%
admin admin 9.09%
admin blank 6.06%
AmbiCom admin admin 100%
Anker admin admin 100%
Arris admin password  93.33%
password  6.67%
More

📚 Private IP Comment

Languages